We've got 1 engine to swap, but 2 to pull!  The into picture shows the end result of a somewhat repetitive process, as the Transit Connect and the Focus ST engine bays are quite similar, with familiar connections from bay-to-bay.

Last time that we checked in, the Focus ST had been prepped for the start of the "pull" process.  With just a few major mounts disconnected, we had an empty-bay!

After the pull; repeat! After removing the Transit Connect front fascia, we itemized (made a master list) of all important connections, and then proceeded with second engine pull.

Vaccar's Master Garage might have the Transit Connect engine bay looking a little lonely, but it's also ready to make a home for the Focus ST drivetrain!

Transit Connect acquired?  Check.  Focus ST acquired?  Check, check!  Nothing left to do, but dig in!  Actually, we had to slow ourselves down for a moment, and take the steps to follow carefully.  While we're thrilled to be the first ones to attempt the TC-ST swap, we wanted to follow some protocol.   First on the lift was the Focus, and before we yanked that motor out of the engine bay, we made sure to to clearly label many of the connections and electrical - complete with corresponding list.  Regardless of how confident we are with the platform, this is going to potentially save some headache later on...when it's in a entirely new engine bay.

It became a true team effort between both Vaccar and our customer to seek out the best possible donor vehicle for the Transit Connect swap. Admittedly, we first consider simply pulling the drivetrain from wrecked vehicle – but, the more we considered the potential needs and requirements of parts for the proper swap (and to save time and money), we started pursuing the purchase of an entire, running, vehicle. Once the choice to find a “full” vehicle was made, it also made sense to obtain a vehicle that boasted the best of vehicle options – bonuses, if you will.

The specimen that was ultimately narrowed down and chosen, located in West Virginia, couldn't have been better find! It was a running and driving 2014 Focus ST, honestly with somewhat minimum front-end damage from the wreck that rendered it a salvage vehicle. It also features a beautiful black leather Recaro seat set, a fairly good condition set of ST wheels, and more. The customer was even able to have a forum-friend, locally check out the vehicle prior to us making the drive with our rig and to do our own inspection.

Once we loaded up the new donor vehicle, and headed back to Vaccar's Master Garage in Florida, we were ready to prep the shop for things to get serious. Upon arrival, we did an initial inspection, as we started to 'unpack' the vehicle of all the parts and pieces. It became apparent that he previous owner of this ST had it equipped with various aftermarket piece, many of which are some nice add-ons that will transfer over to the new chassis - some of those items included upgraded intercooler pipes, aftermarket rear engine mount, bypass valve, and documentation of what might also be a nice clutch set.

At this point, we knew we'd need to take special care with evaluating and handling of parts of the drivetrain from a vehicle that at one point had a owner who may or may not have abused it (sadly, a factor to consider when we spot aftermarket modifications).

Does Vaccar specialize in Ford Transit vans? Well, perhaps we do. When a new customer contacted us in  mid-2016 from Denver, CO, seeking the guidance for a unique project platform, his well-informed hunch was true; we have in fact had our hands on a couple of these awesome vans.

It (our affair with Ford's newest Transit Connect) all started at the 2012 SEMA Show in Las Vegas, when our team was welcomed behind closed doors with a select group of other industry car builders. The task laid before us was to design, pitch, and build bespoke vans for their '13 SEMA display. Fast forward, we arrive in Las Vegas the following year with a highly customized, pre-production (then) Ford Transit Connect vans!

Since then, we've re-worked this platform a couple of times over - mostly restyling concepts, with some custom chassis and performance work as well. However, our new friend from the Mid-West was about to rock our world with a bold, new idea. What started in conversations as the desire for a mildly sporty, manual transmission conversion, quickly turned into the beginning of the very first Ford Transit Connect ST (concept)!

On our way home from SEMA-2016 in Las Vegas, we meet up with our new friend/customer in Colorado to pick up the project vehicle; a freshly acquired 2014 Ford Transit wagon.  We now plan to the journey with the world, as the build unfolded at our Florida facility, Vaccar's Master Garage - feel free to watch and interact on social media with the hashtag #TransitConnectST, @Vaccar / @VaccarOfficial

Above; Photos via Ford Media Center

Below; Additional live from SEMA pictures

From the Vaccar's Master Garage in Orlando, FL...

"Here is what's rocking the rack today; original '69 Dodge Super Bee. In for service & detail - killer ride! ​"

What's cool about the Vaccar's Master Garage location in Orlando, FL is that the same crew that's had their hands on the Vaccar concept and Ford project vehicles is working on your ride - any make, any model, from details to full builds!  Contact the shop today.

Here's a sneak peak of the #VaccarEdge  rear cargo area.  With air suspension system "displays" becoming more common in the modern segment, we wanted to do something unique, but also maintain a simplistic design with a functional trunk.  Here, you'll see how our "floating" mounting setup is taking shape - not only will this bar hide any wiring and hoses, it also serves as a strut bar-type chassis brace.

*Interest in air ride for your ride?  Check out our Vaccar Mailorder webstore, or contact us today!
**All work done at Vaccar's Master Garage in Orlando, FL - and we'll do it for you too!

From the Vaccar's Master Garage in  Orlando, FL...

"Detail double-time for the clean-freak, Carl, at the shop today.  

We've got two very different cars that are both in need a of a fine-tuned cleaning job; 2010 Ford Fusion Sport and a 1992 Nissan 240sx convertible.

Just for our readers!: Mention our blog page and get a quick detail when your car comes in for work or parts, now thru December."  - Aaron ​

From the Vaccar's Master Garage in  Orlando, FL...

"Jesse found this 1963 Dodge Dart that needed a little help with new wiring, so Carl is on it! Rare convertible with red leather, nice for a Floridian cruiser! " - Aaron